How to Record Guitar on PC?


How To

A guitar is used in the most widely known genres. Whether you write hip hop, rock, pop, or RnB, it’s essential to understand how to record guitar.

There’s no one way to get a perfect sound from a guitar. There are some traditional ways to record your guitar, though, so don’t be afraid to try any of them and continue to play before you have a guitar sound that you like. You can use the same interface and some recording equipment to test all of them. Read on to know more about how to record guitar on PC.

How to record guitar on PC?


Record Electric Guitar on PC

1. Record using an audio interface

Connect your computer to the audio interface and follow the instructions. Then just bind your guitar directly into the interface input. And all you do is improve your guitar’s dry signal with different plugins.

This allows one to get a good sound of the guitar by adding distortion, delay, chorus, etc., or using amplifiers. The best thing is that you can keep tuning and adjusting your guitar’s pitch after you have recorded. Start free with Garageband and get your way.

2. Record using USB Interface

You also require a guitar-USB interface apart from your guitar. These devices were developed to offer a one-stop solution to record your guitar with one purchase directly on your computer. An excellent example is the iRig Digital Guitar Interface. This is a good, fast and simple budget solution.

3. Connect the guitar to the amp and then to the audio interface

This is a perfect way to record your guitar if you want your amplifier’s sound, but you don’t want to waste all the time mixing the speaker sound. You simply connect the guitar to the amp, then pull the line up in the interface and record on your selected computer.

You have three volumes to tweak and monitor as you obey the procedure: the guitar, amplifier, and interface. So you’ll need to take some time to adjust all of the settings before you have the sound.

  • Dynamic Mic

A dynamic mic is the easiest microphone. It is not that sensitive, and you will not need any acoustic treatment if you want a super clean recording. It is suitable for a good punchy guitar sound.

  • Condenser Mic

You get a smooth sound with a little condenser microphone, like the AKG C1000s. It’s a decent solution between dynamics and condensers. In reality, a small diaphragm condenser resembles the ‘Swiss Army Knife’ and is ideal for many indoor recording scenarios.

  • Use a small digital recorder

This is not a unique way of capturing the electric guitar. However, you can use either of the above recordings and combine them instead with the audio interface or use a portable digital recording system like the Zoom H4N Pro. You may not have to turn on and attach your monitor or tablet to make the recordings. You instead move the documents to your storage program later. You can attach your guitar directly, record lines even in your Zoom with high-quality microphones. And it has embedded microphones as an alternative to buying a single microphone.

Also Check – Top 7 Best Netflix Alternatives

Record Acoustic Guitar on PC

  • Record with a condenser microphone and an audio interface

A large condenser microphone is a perfect way to catch the profundity of the sound of a guitar. You can place the microphone in many ways. Each place emphasises certain aspects of the sound of the instrument.

You need to search a little to find out where you can position the mic to get the desired sound. Begin by bringing the mic roughly 3 meters from the instrument and precisely point it at the soundhole directly.

  • Record direct from acoustic guitar

You can record directly from your guitar if your acoustic guitar is a 3/4 guitar. Do this by connecting it to an audio interface with the instrument input. The signal you record would be pretty “dry” and generally doesn’t sound the same as your listening.

  • Record using a condenser microphone and ¼ output

You will need an interface with both an XLR micro input and instrument input. And there should be at least two channels so that all signals can be registered at once. The benefit of the process is that you can catch a good and pure signal from the instrument, which you can mix with a tone coming straight from the soundhole.

  • Record with a USB microphone

If you have a limited budget, it could be too expensive to buy a sound interface, amplifier, cables, etc. The advantage is that no other equipment is needed; everything is integrated into the microphone.  A USB microphone is a useful kit even though you will have to buy an interface and an XLR microphone in the future.

Must Check – Download ShowBox for Windows PC

Comments are closed.